up to 450 °C
Heated Sample Lines
Heated sample lines are used to transport gaseous media from the sampling point to an analytical measuring device.
In most cases they are permanently installed in plants or in the form of portable systems. A main field of application is the emission monitoring required by the authorities, e.g. in power plants or waste incineration plants. Our heated analysis lines are also used in process analysis in various branches of industry, e.g.: the chemical and petrochemical industry, where one of their functions is the monitoring and control of combustion processes. Heated analysis lines are also used in engine test benches for combustion engines.
Applications
Automotive industry, emissions monitoring, waste incineration, power plants
Process and Environmental Analysis, Research and Development, Engine Test Stands
Technical Benefits
- Transport of gaseous media without temperature loss
- Heat output optimised for application
- Great heating circuit lengths
- Heating cables produced in-house
- With integrated filter upon request
Product highlights
Connection fitting
End caps seal off heated hoses at both ends. The integrated strain relief provides reliable relief for the connecting cable. End caps are silicone by default and available in EPDM, plastic (polyamide) and galvanised metal.
End caps
Connection cable
Insulation
Depends on max. operating temperature and selection of outer jacket.
Outer jacket
Outer jacket selection is determined by application, bending radius and ambient temperatures. The outer jacket provides heated hoses with reliable protection from humidity, weather, external environmental impact and mechanical strain.
Trace Heater and Spacer
eltherm uses only trace heaters insulated with fluorpolymer. As a standard, we use our ELKM-AE heating cable up to max. 250 °C. The spacer made of braided glass-fibre provides reliable protection for the heating cable against damage and hot spots in the event of bending strain.
Sensor
Inner liners
Technical Data
| Operating temperature range | -5 °C up to +450 °C |
| Length | 0,3 m up to 150 m |
| Nominal temperature | +5 °C up to +450 °C |
| Nominal widh | 2 mm up to 12 mm |
| Voltage | 12 V up to 500 V |
The eltherm designer
From now on, easily perform heat loss calculations for insulated and jacketed pipes and vessels yourself, or manage entire trace heating systems within your projects.
Start design
We are here for you
Contact persons
eltherm GmbH
Ernst-Heinkel-Straße 6-1057299 Burbach, Germany
eltherm GmbH
Ernst-Heinkel-Straße 6-1057299 Burbach, Germany