Versions
Protective braid with a thermoplastic outer jacket. Trace heater with protective tin-plated copper braid for all low-temperature and medium-temperature applications.
up to 200 °C
ELP-Si
Constant Wattage
The single-ended connection of the ELP-Si parallel heating cable ensures a cost-effective and time-saving installation. The heating cable, which is divided into consecutive heating zones, can be cut to the desired length at the respective connection points as needed. When cutting the cable to length, the heating circuit is interrupted at the next connection point. The resulting inactive section of the cable then serves as a connection lead. When designing the heating circuits, an additional connection spacing must therefore be taken into account for each heating circuit.
Compatible accessories:
Connection & Termination Kits: ELVB-SRV-ELP, ELVB-ELPA2-25, EL-ECP2
Junction Boxes: ELAK-2, ELAK- 4.00, ELAK-5, ELAK-5.1, ELAK-5.7, ELAK-R7
Applications
Chemical and Petrochemical Industries, Food Industry
Pump Heating
Filter Heater
Technical Benefits
- Single end connection
- Can be cut off the roll
- Constant power output per meter
- Highly flexible
- Moisture proof
Technical Data
| Bending radius, min. | 30 mm |
| Start-up temperature, min. | -60 °C |
| Installation temperature, min. | -60 °C |
| Nominal voltage | 230 VAC |
| Nominal temperature | +200 °C |
| Bus wire cross section | 2x 1,5 mm² |
The eltherm designer
From now on, easily perform heat loss calculations for insulated and jacketed pipes and vessels yourself, or manage entire trace heating systems within your projects.
Start design
We are here for you
Contact persons
eltherm GmbH
Ernst-Heinkel-Straße 6-1057299 Burbach, Germany
eltherm GmbH
Ernst-Heinkel-Straße 6-1057299 Burbach, Germany