Versions

up to 260 °C

ELP-PFA

Name: ELP-PFA
Availability: InStock

Constant Wattage

The ELP-PFA parallel heating cable combines high flexibility with consistent power output. It can be cut to the required length directly from the roll without compromising heating performance. Thanks to its single-ended power supply, no separate connection cable is required, allowing for quick and efficient installation.

With power ratings of up to 60 W/m when installed longitudinally along piping, the ELP-PFA is particularly well-suited for applications with high heat demand, such as those found in industrial process plants. The temperature-resistant fluoropolymer outer jacket and the material’s high chemical resistance ensure a long service life – even under demanding operating conditions.

Compatible accessories:

Connection & Termination Kits: ELVB-ELPEx-25, ELVB-ELPEx-20, EL-ECP-Ex, ELVB-SRV-ELP, ELVB-ELPA1-25, EL-ECP+, EL-ECP1

Junction Boxes: ELAK-Ex-2.00, ELAK-2, ELAK- 4.00, ELAK-5, ELAK-5.1, ELAK-5.7, ELAK-R7

Technical Data

Applications

Freeze prevention

Temperature maintenance

Silos, vessels, tanks

Roofs and gutters

Industrial Applications

Pipelines

Technical Benefits

Single end power input
Can be cut off the roll
Constant power output per meter
Long life cycle
Laying without exact measuring possible
High chemical resistance
UV resistance
Moisture proof

Product Highlights

Technical Data

Bending radius, min.	25 mm
Maximum current	40 A
Start-up temperature, min.	-60 °C
Installation temperature, min.	-60 °C
Nominal voltage	230 VAC to 277 VAC*
Nominal temperature	+260 °C
Bus wire cross section	2x 1.5 mm² (2x 4.0 mm² upon request)
*Note	277 VAC operation is permitted only for ELP-PFA 15 W/m, 30 W/m, and 45 W/m!

The eltherm designer

From now on, easily perform heat loss calculations for insulated and jacketed pipes and vessels yourself, or manage entire trace heating systems within your projects.

Start design