up to 700 °C

ELK-MI AY 825

Name: ELK-MI AY 825
Availability: InStock

Mineral-Insulated Clean Laser Seal Trace Heater

ELK-MI AY 825 heating cables consist of a single- or twin-conductor in-line trace heating system connected to mineral-insulated cold leads via a high-quality laser splice. The cold leads are available with copper conductors in cross-sections of 2.0 mm², 2.5 mm², 3.3 mm², or 5.0 mm².

The outer sheath is made of corrosion-resistant alloy 825. The open end of the cold lead is encapsulated and equipped with a flexible connection lead. The cross-section of the connection lead is matched to that of the cold lead. Additionally, a separate ground lead with a cross-section of 1.5 mm² is integrated.

Each cold lead is equipped with a pressure-resistant compression ring fitting made of 1.4404 stainless steel (AISI 316L) in thread sizes M20×1.5 or M25×1.5. The fitting is reliably secured against accidental loosening or potential loss by the encapsulated end seal.

The MI heating cables are pre-assembled by eltherm and delivered ready for installation. Each unit is equipped with a nameplate containing all relevant technical data and markings.

Compatible accessories:

Junction Boxes: ELAK-Ex 2.00, ELAK-Ex 4.21, ELAK-Ex 4.22, ELAK-Ex 4.23, ELAK-3-SP, ELAK-6-SP

Technical Data

Applications

Temperature maintenance

Pipelines

Silos, vessels, tanks

Industrial Applications

Technical Benefits

Purity: No foreign material
Full range of resistances
Fast assembly, low cost
1 mile (1,6 km) on 1 circuit
In by noon, out by 5
100% quality check
Safety: non-destructive tests
No filler holes.
MgO = ASTM E1652

Product Highlights

Technical Data

Output, max.	up to 250 W/m
Bending radius, minimal	Diameter x 6
Installation temperature, min.	- 60 °C
Nominal voltage	up to 500 V AC
Nominal temperature	700 °C
IP rating	IP65
Ambient temperature	- 60 °C up to + 60 °C

The eltherm designer

From now on, easily perform heat loss calculations for insulated and jacketed pipes and vessels yourself, or manage entire trace heating systems within your projects.

Start design