Heated Pressure Hoses

up to 250 °C

Heated Pressure Hoses

DN4-DN25  -  Heated pressure hoses serve to heat media, maintain a constant temperature and transport media such as the following without heat loss: oil, grease, wax, resin, tar, paint, water, glue, plastic, casting compound, food, etc. The heated hose is mounted on movable system and machine parts in most cases.

Show technical data
  • Pasting robot
  • Pipe cleaning
  • Steam cleaners
  • Washing systems
  • Epoxy resin system
  • Packaging systems
  • Roof renovation
  • Paint spraying plants
  • Dosing systems
  • Bottling systems
  • Surface Technology
  • Fastening Technology / hot-melt systems, packaging gluing and labelling machines
  • PU foaming plants
  • Glass and sensitive surfaces
  • Chemicals
  • Oil
  • Glue
  • Foodstuffs
  • Paints
Technical Benefits
  • Temperatures from 5 °C up to 250 °C
  • Diameter 4 mm up to 25 mm
  • Voltage: 12 V up to 400 V
  • Operating pressure: up to 500 bar
  • Heat output optimised for application
  • Trace heaters produced in house
  • Available for automotive industry as silicone or LABS-free version
Start design

Product highlights

Click on the red and white markers for more details.
Heated pressure hose for up to 250 °C.

Connection fittting:

connects the heating hose to the system part (connection, spray nozzle, etc.)

End caps:

End caps seal off heated hoses at both ends. The integrated strain relief provides reliable relief for the connection cable. End caps are available as standard in silicone, EPDM, plastic (polyamide) and galvanised metal.

Outer jacket:

Selection of the outer jacket is determined by application, bending radius and ambient temperature. The outer jacket provides heated hoses with reliable protection against humidity, weather and external environmental effects as well as mechanical and dynamic loading.

Insulation:

Depends on max. operating temperature and selection of outer jacket.

Trace Heater and Spacer:

eltherm uses only Fluoropolymer-insulated trace heaters. We focus on the highest possible power density with th result of excellent homogeneous heat distribution. The spacer is made of a braided glass-fibre and provides reliable protection for the trace heater against mechanical damage and hot spots in the event of bending strain.



Sensor:

Sensor

Inner lines:

The selection of inner lines is based on the max. nominal pressure , max. nominal temperature and the specific application.

Connection cable:

Sensor and connection cables are routed separately in standard configuration. The default length of the connection cables is 1.5m each. Upon request, any customary plug can be mounted to the connection cable.

  1. Connection fittting:

    connects the heating hose to the system part (connection, spray nozzle, etc.)

  2. End caps:

    End caps seal off heated hoses at both ends. The integrated strain relief provides reliable relief for the connection cable. End caps are available as standard in silicone, EPDM, plastic (polyamide) and galvanised metal.

  3. Outer jacket:

    Selection of the outer jacket is determined by application, bending radius and ambient temperature. The outer jacket provides heated hoses with reliable protection against humidity, weather and external environmental effects as well as mechanical and dynamic loading.

  4. Insulation:

    Depends on max. operating temperature and selection of outer jacket.

  5. Trace Heater and Spacer:

    eltherm uses only Fluoropolymer-insulated trace heaters. We focus on the highest possible power density with th result of excellent homogeneous heat distribution. The spacer is made of a braided glass-fibre and provides reliable protection for the trace heater against mechanical damage and hot spots in the event of bending strain.



  6. Sensor: Sensor
  7. Inner lines:

    The selection of inner lines is based on the max. nominal pressure , max. nominal temperature and the specific application.

  8. Connection cable:

    Sensor and connection cables are routed separately in standard configuration. The default length of the connection cables is 1.5m each. Upon request, any customary plug can be mounted to the connection cable.

Approvals

ATEX

Technical Data

Nominal temperature
5 °C up to 250 °C
Diameter
4 mm up to 25 mm
Voltage
12 V up to 500 V
Operating pressure
up to 500 bar

Downloads

Broschüre, Heizschläuche – Druckschläuche, DE
pdf
3.5 MB
Download
Brochure, Heated Pressure Hoses, GB
pdf
3.5 MB
Download
Declaration of Conformity (Ex), DE, GB, FR
pdf
522.4 KB
Download
Declaration of Conformity, DE, GB, FR
pdf
399.6 KB
Download
Datenblatt Silikonüberzug, DE
pdf
223.0 KB
Download
Datasheet Silicone Cover, GB
pdf
222.3 KB
Download
On the move globally
always within reach

Phone: +49 (0) 27 36 / 44 13-0

Fax: +49 (0) 27 36 / 44 13-50

E-mail: info@eltherm.com

Contact us