ELP/PFA

Versions

BOT

up to 260 °C

ELP/PFA

Constant Wattage

Parallel trace heaters with resistance wire offer enormous flexibility, because they can be cut to length and provide constant wattage power output. They are approved for use in hazardous areas.

Show technical data
  • Valves, pumps
  • Pipelines
  • Food processing industry
  • Paper industry
  • Building construction
Technical Benefits
  • Single end power input
  • Can be cut off the roll
  • Constant power output per meter
  • Long life cycle
  • Laying without exact measuring possible
  • High chemical resistance
  • UV resistance
  • Moisture proof
Start design

Product highlights

Click on the red and white markers for more details.
The parallel trace heaters ELP/PFA can be cut to length and provide constant wattage power output.

Bus wire

Insulation:

Fluoropolymer

Insulation:

Fluoropolymer

Heating conductor

Insulation:

Fluoropolymer

Protective braid:

Nickel-plated copper

Outer Jacket:

Fluoropolymer

  1. Bus wire
  2. Insulation: Fluoropolymer
  3. Insulation: Fluoropolymer
  4. Heating conductor
  5. Insulation: Fluoropolymer
  6. Protective braid: Nickel-plated copper
  7. Outer Jacket: Fluoropolymer

Approvals

ABS
ATEX
KTL
Ukraine
VDE
EAC
IECEx

Technical Data

Nominal temperature
260 °C
Bending radius, min.
25 mm
Bus wire cross section
2 x 1,5 mm²
Nominal voltage
230 V
Installation temperature, min.
- 45 °C
Start-up temperature, min.
- 45 °C

Downloads

Declaration of Conformity (Ex, System), DE, GB, FR
pdf
795.7 KB
Download
Declaration of Conformity (Ex), DE, GB, FR
pdf
476.9 KB
Download
Declaration of Conformity, DE, GB, FR
pdf
412.1 KB
Download
Montagehandbuch, ELP, DE
pdf
1.0 MB
Download
Installation Manual, ELP, GB
pdf
1.0 MB
Download
Datenblatt, ELP-PFA, DE
pdf
300.1 KB
Download
Data sheet, ELP-PFA, GB
pdf
300.7 KB
Download
On the move globally
always within reach

Phone: +49 (0) 27 36 / 44 13-0

Fax: +49 (0) 27 36 / 44 13-50

E-mail: info@eltherm.com

Contact us