PROCESSING
HEAT WITH

eQ

Self-regulating Parallel Trace Heaters

Self-regulating trace heaters consist of two parallel bus wires embedded in a heating matrix doped with carbon particles. When the temperature rises in operation, molecular expansion increases the distance between the carbon particles. The resistance increases and output drops. When temperatures fall, this process is reversed and output increases. This physical property means that the heater will never overheat, can be assembled crosswise and can be operated without a temperature controller. Moreover, selected ELSR heating cables are approved for use in hazardous areas.

The ELSR (eltherm-self-regulating) trace heater is used for frost protection and temperature maintenance on vessels, pipes, valves, etc. It may be immersed in fluids. For use in aggressive environments (e.g. in chemical or petrochemical industry), the trace heater is coated with a special chemically resistant outer jacket (fluoropolymer), option “BOT”.

Benefits

  • Self-regulating with adaptable output
  • Various temperature ranges
  • Demand-orientated out-put grading
  • High chemical resistance
  • No temperature limitation required (important at Ex-applications)
  • Easy to install
  • Can be cut to length off the roll
  • Connection by plug-in connectors

Design

BO

AO

BOT

AF

BF

Approvals

ABS
ATEX
GL
IECEx
INMETRO
KTL
KTW
NEPSI
Nordamerika
nordische Länder
SEV
Ukraine
VDE
EAC

Trace Heater:

ELSR-N, ELSR-LS, ELSR-M, ELSR-R, ELSR-W, ELSR-H

Connection Kit:

e. g. El-Clic-P (or ELVB-...)

End Termination Kit:

EL-EC...

Junction Box:

e.g. ELAK-RS

Pipe Mounting Fitting:

ELMW-..., ELB-...

Fasteners and Self-adhesive Tapes, Foils:

ELB-...

Insulation Bushing:

ELISD-...

Warning Sign:

EL-WS...

Temperature Controller:

ELTC-14

Temperature Sensor:

ELTF-...

  1. Trace Heater:

    ELSR-N, ELSR-LS, ELSR-M, ELSR-R, ELSR-W, ELSR-H

  2. Connection Kit:

    e. g. El-Clic-P (or ELVB-...)

  3. End Termination Kit:

    EL-EC...

  4. Junction Box:

    e.g. ELAK-RS

  5. Pipe Mounting Fitting:

    ELMW-..., ELB-...

  6. Fasteners and Self-adhesive Tapes, Foils:

    ELB-...

  7. Insulation Bushing:

    ELISD-...

  8. Warning Sign:

    EL-WS...

  9. Temperature Controller:

    ELTC-14

  10. Temperature Sensor:

    ELTF-...

Visiting from the US or Canada?

Check out our special portfolio for north-america.


ELSR-N

The versatile self-regulating heating cable ELSR-N is suited for freeze prevention and temperature maintenance in the…

ELSR-LS

The versatile self-regulating heating cable ELSR-LS is our ‘light’ version for temperatures up to 80 °C. This heating…

ELSR-M

The heating cable ELSR-M is very flexible and is used for special applications where installation dimensions are needed…

ELSR-R

The ELSR-R line is used where its round geometry facilitates installation in sealing and door profiles. Typical…

ELSR-W

ELSR-W is employed for temperature maintenance on hot water pipelines and fat disposal lines in canteens or commercial…

ELSR-Ramp

ELSR-Ramp for freeze prevention is specially designed for concrete ramps and outdoor surfaces.

ELSR-FHP

Freezing and frost heave may occur underneath the foundations of cooled storage areas. This can result in a deformation…

ELSR-H

The ELSR-H high temperature trace heater range is designed for temperature maintenance in industrial processes and…

ELSR-SH

The ELSR-SH high temperature trace heater range is designed for temperature maintenance in industrial processes and…

ELSR-SHH

The ELSR-SHH high temperature trace heater range is designed for temperature maintenance in industrial processes and…

ELSR-M-AF/BF

ELSR-M-AF/BF is suited for freeze prevention in pipes and pipelines with seasonal exposure. Typical applications are…


Engineering your Advantage

Your Processes in Expert Hands

We develop complete solutions for processes in production, storage, handling, and transport. Our engineers are committed to understanding your exact technical requirements.  Their pride is to develop the best possible heat tracing solution. 

We are here for you

Contact Person

Janina Schäfer

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299, Burbach
Germany

Phone: +49 2736 4413-8283
Fax: +49 2736 4413-50
E-mail: jschaefer@eltherm.com

Christian Hemker

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299, Burbach
Germany

Phone: +49 2736 4413-8280
Fax: +49 2736 4413-50
E-mail: chemker@eltherm.com

On the move globally
always within reach

Phone: +49 (0) 27 36 / 44 13-0

Fax: +49 (0) 27 36 / 44 13-50

E-mail: info@eltherm.com

Contact us