up to 80 °C

ISD-1

Electronic Ice and Snow Detector

The ice and snow detector protects guttering and roof surfaces against winter damage caused by heavy snow loads and ice formation. Formation of ice is not possible because water can drain off. The use of an ISD-1 controller is recommended for economic reasons. An energy-saving method of operation is possible as a result of detecting both moisture and temperature, the heating is only switched if the ambient temperature is slightly above the frost limit and moist air is present. The micro-processor controlled ISD-1 features an illuminated LCD-display to set and view its values for temperature, moisture and expired heating period.

  • Freeze prevention
Technical Benefits
  • Energy-saving
  • Safe and economic use
  • Simple operation

Technical Data

Measuring range
- 30 °C up to + 80 °C
Enclosure dimension
105 x 86 x 57 mm (wxhxd)
Mounting option
Standard rail installation
Supply voltage
230 V AC, 50/60 Hz, +/- 10 %
Temperature sensor
Display
Illuminated, 2-lines, 16-digits
Power consumption
20 W
IP rating
IP20
Switching capacity
6 A
Ambient temperature
- 10 °C up to + 50 °C

Downloads

Broschüre, Mess- und Regeltechnik, DE
pdf
4.5 MB
Brochure, Temperature Control and Monitoring, GB
pdf
4.4 MB
Montage- und Inbetriebnahme (ISD1.1), DE
pdf
1.9 MB
Montage- und Inbetriebnahme (ISD-STH), DE
pdf
1.6 MB
Montage- und Inbetriebnahme (ISD1), DE
pdf
1.8 MB
Datenblatt, ISD-1, DE
PDF
397.0 KB
Datenblatt, ISD-1.1, DE
pdf
266.0 KB
Data sheet, ISD-1, GB
PDF
394.8 KB
Data sheet ISD-1.1, GB
pdf
263.8 KB

We are here for you

Contact Person

Reimund Lotz

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299 Burbach
Germany

Phone: +49 2736 4413 8154

Thomas Stuff

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299 Burbach
Germany

Phone: +49 2736 4413 8155

On the move globally
always within reach

Phone: +49 (0) 27 36 / 44 13-0

Fax: +49 (0) 27 36 / 44 13-50

E-mail: info@eltherm.com

Contact us