ELP/Si-F

Versions

BOT

B

up to 200 °C

ELP/Si-F

Constant Wattage

These heating cables are particularly suitable for maintaining temperatures of up to +150 °C. Its great flexibility down to - 70°C means that this version is ideal for heat tracing in industrial refrigeration or in countries with very harsh climates. The heating cable consists of a succession of heating zones (length = contact spacing) and can be cut to length in sections of the contact distance to the required length. When cutting into lengths, the heating circuit is interrupted up to the next contact point and this non-active part can be used as a cold lead. During the design phase, one contact spacing length per planned heating circuit must be calculated additionally.

  • Silos, vessels, tanks
  • Valves, pumps
  • Pipelines
  • Food Processing Industry
  • Freeze prevention
  • Temperature maintenance
  • Single end connection
  • Can be cut off the roll
  • Constant power output per meter
  • Highly flexible

Product highlights

Click on the red and white markers for more details.
The heating cable ELP/Si-F is suitable for maintaining temperatures of up to +150 °C.

Bus wire

Heating conductor

Protective braid:

copper / zinc

Outer jacket:

Fluoropolymer (ELP-Si-F-BOT)

Insulation:

Silicone

  1. Bus wire
  2. Heating conductor
  3. Protective braid:

    copper / zinc

  4. Outer jacket:

    Fluoropolymer (ELP-Si-F-BOT)

  5. Insulation:

    Silicone

Technical Data

Nominal voltage
230 V or 400 V
Bending radius, min.
30 mm
Bus wire cross section
2 mm²
Installation temperature, min.
- 70 °C
Start-up temperature, min.
- 70 °C

Downloads

We are here for you

Contact Person

Heike Ritter

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299 Burbach
Germany

Phone: +49 2736 4413-8281

Cristina Talia

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299 Burbach
Germany

Phone: +49 2736 4413-8284
Fax: +49 2736 4413-50

On the move globally
always within reach

Phone: +49 (0) 27 36 / 44 13-0

Fax: +49 (0) 27 36 / 44 13-50

E-mail: info@eltherm.com

Contact us