ELP/Si

Versions

BO

up to 200 °C

ELP/Si

Constant Wattage

The installation of this heating cable is highly cost-efficient with any kind of heat tracing application thanks to the single end power input. The heating cable consists of a succession of heating zones (length = contactspacing) and can be cut to length in sections of the contact distance to the required length. When cutting into lengths, the heating circuit is interrupted up to the next contact point and this non-active part can be used as a cold lead. During the design phase, one contact spacing length per planned heating circuit must be calculated additionally.

  • Valves, pumps
  • Silos, vessels, tanks
  • Pipelines
  • Freeze prevention
  • Temperature maintenance
  • Food Processing Industry
  • Single end connection
  • Can be cut off the roll
  • Constant power output per meter
  • Highly flexible
  • Moisture proof

Product highlights

Click on the red and white markers for more details.
The heating cable ELP/Si is highly flexible and moisture proof.

Bus wire

Insulation:

Silicone

Heating conductor

Insulation:

Silicone

Protective braid:

Copper

Outer jacket:

Silicone

  1. Bus wire
  2. Insulation:

    Silicone

  3. Heating conductor
  4. Insulation:

    Silicone

  5. Protective braid:

    Copper

  6. Outer jacket:

    Silicone

Approvals

EAC

Technical Data

Protective braid
Copper
Outer jacket
Silicone
Nominal temperature
200 °C
Bending radius, min.
30 mm
Bus wire cross section
2 x 1,5 mm²
Nominal voltage
230 V
Installation temperature, min.
- 60 °C
Start-up temperature, min.
- 60 °C
Insulation
Silicone

Downloads

Brochure
pdf
6.3 MB
Installation Manual
pdf
661.0 KB
Datasheet
pdf
89.8 KB
Accessories
pdf
355.0 KB
Declaration of Conformity
pdf
379.6 KB

We are here for you

Contact Person

Christian Hemker

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299 Burbach
Germany

Phone: +49 2736 4413-8280
Fax: +49 2736 4413-50

Cristina Talia

eltherm GmbH (Headquarters)
Ernst-Heinkel-Straße 6-10
57299 Burbach
Germany

Phone: +49 2736 4413-8284
Fax: +49 2736 4413-50

On the move globally
always within reach

Phone: +49 (0) 27 36 / 44 13-0

Fax: +49 (0) 27 36 / 44 13-50

E-mail: info@eltherm.com

Contact us